build simple wooden railing for outdoor steps

Local building codes vary, but pretty much anywhere, if you have a deck or porch 30” or more above ground level (lower in some areas), a railing is required, as is a All you need is a few basic tools and very basic carpentry skills, and you'll be stepping up, and down, with minimal butt to stair contact!

Install the Vertical Rails. Measure and cut the vertical rails from 1x2s and install them using galvanized deck screws. Make sure to follow local building codes for the distance needed between the vertical rails; most communities require 6" or more between rails for safety reasons.

Exterior. Exterior stairs are made of concrete, stone, wood, or other weather-resistant materials. If wood is used, it should be of a type treated or naturally Some codes require hand rails for certain heights, and specific dimensions for some stairs. As such, it may be very elaborate or simple and homey.

The government has made sure of that :-) This is a simple hand rail that we built for our friend Bill to meet code. Now that we have our step dimensions we need to make some calculations to determine how much pipe and what type of fittings (we are using Kee Klamp fittings) 4 Concrete anchors -

Building a handrail yourself is an inexpensive way to add a new look and feel to stairs in your home, whether indoors or outdoors. A customized rail and stair products. If you're installing a wood railing, you can bring home wood samples from your local hardware store to match them to the wood fixtures in your home.

For no reason other than general laziness, I chose to build the stair railing and the short flat railing at the site. The first step was to mark the location of the upper post and cut the hole in the deck boards. The upper post was set to its final height, but the lower post was left too long. These deck posts