hidden decking fasteners first last boards

OUTSIDE edge with the board snug to the structure. Now, finish driving the CAMO Hidden Fasteners in the the board manually. (don't use the Pro tool). Finish the deckboard by face fastening the inside edge. We recommend using 2 ½” x #7 trimhead CAMO. Exterior Deck Screws. (2) face fasten the first board or 

At the same time, the screw allows shrinking and swelling between 4-6 mm. The connector is hidden but each board can be removed individually. Concealed from the first board to the last; Very robust and can be used even for beach and boat docks; Boards can be quickly and individually replaced; Optimal wood protection 

When using grooved-edge boards, our hidden deck fastening system installs between the deck boards, fastening them to the joists with no visible deck screw heads on the walking surface. This precision Blade™ is the first saw blade on the market specifically designed for cutting composite decking materials. Uniting 

These installation instructions and warranty only apply to the Natural Brown and Natural Grey colors of Style Selections decking. From time to time, .. route sides that will be used to attach hidden fasteners. Option 1: Face Screw. 1. Install start clips against riser on each step. 2. Install first board. Follow steps on page 15. 3.

Thoroughly reading all instructions first will make for more profitable projects. Failure to do so may result in more difficult installation and may void warranty. • For decks using metal joisting, specialized surface fasteners are required. Do not use ArmorGuard Hidden. Fasteners. Fasteners for metal that install at a 90 degree.

Most complete product offering in the market Mantis clips were originally designed to include start and finish clips with every 50 square foot box. We were the first company to offer a solution that made screwing down that first or last deck board a thing of the past. We are also the ONLY company to offer a Transition clip 

With the TC-2, the screw penetrates the bottom corner of the decking board. Any minor splitting caused by the screw will not jeopardize the hold the fastener has on the board. What is the life expectancy of the TC fastener? Tiger Claw fasteners are premium high nickel stainless steel and will typically out last the decking.

On opposite side of first deck board, insert a. Veranda ArmorGuard Hidden Fastener into the side groove of the board at every support joist (single tab first). the final deck board by fastening a 2-1/2" (6 cm) long stainless steel or composite deck screw in each pre-drilled hole. DO NOT OVER-TIGHTEN THE. SCREWS.

Who came up with the first hidden decking fastener is open to debate. Weston Leavens remembers first seeing them in a magazine sometime around the end of the Reagan administration. A screw or nail affixed the clip to the first board and to the joist, and the second board was driven onto a prong 

The hidden fastener is a deck fastening system designed specifically for grooved (GV) deck boards. The SCREWS. 4. Insert a hidden fastener into the side groove of the board at every support joist (single tab first). Position the final deck board onto the last set of fasteners. Ensuring a 

The newest generation of hidden deck fasteners, featuring Mantis technology provides a hidden fastener solution for grooved decking made from PVC, Starter Clip Starter clips are used to fasten the first deck board to the ledger board. Finish Clip · Finish Clip Finish clips fasten the last deck boards to rim joists.

Phantom Hidden Deck Fasteners to secure the board along the other side (1). To Secure the Final Deck Board, positioning the last deck board in place, secure the board by angling a screw through the clip and into the Size and cut the first fascia/deck board, allowing for. 1/4" (6 mm) clearance from the wall or other 

Step 1: Installing the First Deck Board. Apply DeckWise JoistTape™ or a bead of exterior adhesive to each joist approximately 3/8 " in width. For adhesives, you may want to do this as you go so, that, it does not dry before completion if you have a larger area to install. While adhesive adds hold-down strength to the boards, 

Deck Boards. 12 in. o.c. (31 cm). Joists Deck Boards. Perpendicular decking boards. Diagonal decking boards. Joist location is important for the safety of the deck (5 cm x 20 cm) or larger. Note: For decks using metal joists, specialized surface fasteners are required. Do not use Phantom Hidden Fasteners. Only fasteners.

It's easy with the Deck Clip™ deck hidden fastener. As with all blind fasteners you will need to get the first board down along one edge or the wall of the house. Use our 2″ square drive screws to this procedure till the deck is finished. On the last board you will need to drill and screw it down like you did the first board.

Hideaway™ Hidden Fasteners. Maximum board. Screw hole should be in line with the center of joist. See Illustration B. STEP 3 — Install First Fastener. While standing on deck board, install provided screw at. 45° angle Prior to installing last board, predrill a pilot hole at a 45° angle through rim joist. Once hole is