picket fence underpinning 2 inches high

48" Tall 3 rail Ultra Aluminum Fence : 48 inch Residential (Assembled) 48" Aluminum Fence Panels by ULTRA UAB-200 3 RAIL "ASSEMBLED" 48" Tall 2 Rail - Ultra and SmartTime Aluminum Fence : 48 inch Residential (Assembly-Required) 48" Metal Fence -STRONGEST 2 RAIL Fence = 1" x 5/8" pickets "Ready to 

I purchased this little fence to use in a Fairy Garden. It is untreated smooth plain wood which is what a wanted so I could paint on my own wood detail crevices and knots to make it look like a real tree made into a fence. You can probably find cheaper ones but this style is 2 inches high where most of the others are only 1 

DIYNetwork.com has written and video instructions on how to install a picket fence. For our project we're building a 4-foot tall picket fence. The same kind of construction can be used to build a privacy Use a post-hole digger to make a hole 8 inches wide and just over 2-feet deep (image 2). Pour about 4 inches of gravel 

What We're Up To: Picket Fence Repair. After being The good news is that the fence was made from ordinary 2×4 and 1×3 lumber, so I thought I had a decent chance of fixing it up. The concave pattern is more like an extra-large herringbone: there is no curve, just a straight line from high-point to low-point to high-point.

The gate I'm making is 3ft high x 2ft 6 wide in old money (or 915mm high x 762mm wide), so if you need something a bit bigger or bit smaller, you'll have because it's the pre-planed all round sizes (the sawn sizes) that are referred to usually 3 inches by 2 inches will finish at 2 3/4 inches by 1 3/4 inches.